Carpentry & Trim · Belle Isle & Orlando, FL
Carpentry & Trim done right.
Trim is where craftsmanship shows. Tight miters, level reveals, and joints that don't open when the AC swings 20° aren't accidents — they're the result of acclimating material, pre-painting before install, gluing every joint, and pinning at the right angle. We install crown, baseboard, casing, chair rail, wainscoting, and full built-ins to a paint-grade or stain-grade finish.
Starting at
By project
Turnaround
1–5 days for most rooms
Warranty
Lifetime joint warranty on installs
What you get
The carpentry & trim standard.
Crown molding, baseboards, doors, casing, wainscoting, and built-ins with tight miters and no caulk cover-ups.
- ✓Coped joints on crown & base (not just mitered)
- ✓Pre-finished trim where possible
- ✓Glued + nailed joints that stay tight
- ✓Caulk for paint lines, not gap cover-ups
- ✓Interior door hang & adjustment
- ✓Custom built-ins, shelves, and millwork
Our process
How a carpentry & trim job runs.
No mystery, no surprises. Here's exactly what happens from quote to final walk-through — the same way every time.
STEP 01
Design & measure
We talk profiles (modern flat, traditional ogee, craftsman square), measure linear footage, account for waste, and quote.
STEP 02
Acclimate & pre-finish
MDF and pine sit in your home 24–48 hours before install to acclimate. We prime and topcoat one side before install so finish lines are crisp.
STEP 03
Cope, glue, pin
Inside corners are coped (not mitered) on crown and base. Joints get wood glue. Pin nailer for crown, 16-ga for base. Reveals are measured, not eyeballed.
STEP 04
Caulk & paint
Caulk goes on paint lines only — never to hide a bad joint. Touch-up paint or stain over the install for a seamless finish.
Scope & materials
What’s included — and what isn’t.
Included in every quote
- Material sourcing or supply-only
- Cut, install, and fastening
- Coped inside corners on crown & base
- Caulking of paint lines
- Filling of nail holes
- Touch-up paint or stain over install
Not included (quoted separately)
- Structural framing or load-bearing changes
- Hardwood floor install (referred)
- Cabinet manufacturing (we install pre-built)
Materials we use
- Primed MDF, finger-joint pine, poplar
- Stain-grade red oak, white oak, maple
- Titebond II wood glue
- 23-ga & 16-ga finish nails
Pricing
Honest, fixed-price carpentry & trim quotes.
Real numbers from real Orlando-area jobs. Your written quote is a fixed price — not an estimate that creeps.
Crown molding (per linear ft, installed & painted): $9–$16
Baseboard (per linear ft, installed & painted): $7–$12
Interior door hang (slab in existing frame): $180–$280
Pre-hung door install: $320–$520
Custom built-in (per linear ft): $280–$520
All quotes include materials, labor, prep, clean-up, and the workmanship warranty. No deposits to schedule. No surprise change orders.
Service area
We work across the Orlando metro.
Based in Belle Isle, serving Central Florida within a 30-mile radius. If you're outside that, call us — we make exceptions for the right project.
- Carpentry & Trim in Belle Isle, FL
- Carpentry & Trim in Orlando, FL
- Carpentry & Trim in Edgewood, FL
- Carpentry & Trim in Pine Castle, FL
- Carpentry & Trim in Conway, FL
- Carpentry & Trim in Doctor Phillips, FL
- Carpentry & Trim in Lake Nona, FL
- Carpentry & Trim in Winter Park, FL
- Carpentry & Trim in Kissimmee, FL
- Carpentry & Trim in Windermere, FL
- Carpentry & Trim in Oviedo, FL
- Carpentry & Trim in Apopka, FL
- Carpentry & Trim in Ocoee, FL
- Carpentry & Trim in Winter Garden, FL
- Carpentry & Trim in Sand Lake, FL
- Carpentry & Trim in Hunters Creek, FL
- Carpentry & Trim in Meadow Woods, FL
- Carpentry & Trim in Azalea Park, FL
- Carpentry & Trim in Maitland, FL
- Carpentry & Trim in Altamonte Springs, FL
Frequently asked
Carpentry & Trim questions, answered.
Do you cope crown molding or just miter it?
+
We cope every inside corner on crown and baseboard. Coped joints stay tight when the house moves with humidity; mitered inside corners open up within a year in Florida.
Can you match existing trim profiles?
+
Yes. We bring a sample of your existing profile to our trim supplier and either find an exact match or have a custom knife run for larger jobs.
Do you install pre-hung doors?
+
Yes — pre-hung and slab. Pre-hung in an existing rough opening runs $320–$520 installed. Slab into existing jamb runs $180–$280 with new hinges and a strike.
Pairs well with
Other services homeowners book with this.
Interior Painting
Walls, ceilings, trim, and full-home repaints with hand-cut edges and two finish coats standard.
View service →
Drywall & Plaster Repair
Hole patches, water-damage repair, full skim coat, and texture matching that disappears into the wall.
View service →
Handyman Repairs
The household to-do list other contractors won't take. By the hour or by the project, all in one visit.
View service →
Free estimate · No pressure · 48-hour turnaround
Got a project?
Let’s build it.
Tell us the job. We’ll walk the space, give you an honest line-item quote, and have a crew on-site within the week. No deposits to schedule. No surprise fees.